AVG Ultimate installation file

Hello Pete,

I apologize for the inconvenience.

Please press Window key along with R key to open the Run command.
-Type ncpa.cpl on the Run command and enter to open the Network Connections.
-Now right-click on your active internet connection (this may be "Ethernet", "Wireless Network Connection" or "Local Area Connection" depending on how your computer is set up) and select Properties.

-In the Networking tab, click once on Internet Protocol (TCP/IP4) to highlight it, and then click Properties.

-Select Use the following DNS server addresses and then enter the following:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

-Click OK to finish.

After doing the above steps, use the offline installer link to install AVG Ultimate. If you face any difficulties, provide the screenshot of the error message to assist further.
That worked after I had run the AVG remover tool to clean out all traces of the previous installations.

Thanks to both of you for your help and quick response.

Regards

Pete

Can I download a complete AVG ultimate installation file instead of only the small 3.4mb setup file.

Each time I try a internet installation using the setup file the installation fails saying I'm not connected to the internet thus I want to do a local install.

Pete

Pete, thanks for updating the status.

I am glad I have fulfilled your expectations. You're welcome.
OK Pete, No probs.. Thanks for returning to the Community & posting.
AVG Guru
Pete, If applicable.. For your info, just in case that you are unaware, you can post the screenshot here in your topic. Click on 'Answer' & then click on the 'Image' [mountain symbol] & follow the instructions. 
Also for your info....
[1] AVG Ultimate 32bit off line installer file (http://files-download.avg.com/inst/mp/AVG_Ultimate_x86_1829.exe)
[2] AVG Ultimate 64bit off line installer file (http://files-download.avg.com/inst/mp/AVG_Ultimate_x64_1828.exe)
AVG Guru

That worked after I had run the AVG remover tool to clean out all traces of the previous installations.

Thanks to both of you for your help and quick response.

Regards

Pete

Hello Pete,

I apologize for the inconvenience.

Please press Window key along with R key to open the Run command.
-Type ncpa.cpl on the Run command and enter to open the Network Connections.
-Now right-click on your active internet connection (this may be "Ethernet", "Wireless Network Connection" or "Local Area Connection" depending on how your computer is set up) and select Properties.

-In the Networking tab, click once on Internet Protocol (TCP/IP4) to highlight it, and then click Properties.

-Select Use the following DNS server addresses and then enter the following:
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

-Click OK to finish.

After doing the above steps, use the offline installer link to install AVG Ultimate. If you face any difficulties, provide the screenshot of the error message to assist further.